Home About us Products News Contact
 PRODUCT CENTER
 whatsapp:
 
 
 News
At present you in : Home > News
BOP 13 5/8 * 10 K (3 Set)
    click:524     adddate:2017-6-30

BOP 13 5/8 * 10 K    (3 Set)
AS Per attach specification
Built as per API Standard  And specifications API Standard  53  4th edition API Spec 16A, shear ram to be able to shear relevant drill pipe  according to API 16D Shear ram shall be able to hold pressure after  shearing is performed Construction materials should meet the standard NACE MR-01- 75

 
135/8'''' x5000 psi Annular BOP, , Top studded, bottom flanged  13 5/8''x10000psi ,ring grove lined with nick based alloy
 
135/8''' x10000 psi double RAM BOP, Top& bottom Flanged,    ring grove lined with nick based alloy, With four side outlet 4 1/16''x10000 psi flanged. With large bore shear bonnet including  tandem booster on upper cavity w/manual locking screws ,w/lifting plates capacity 100 tons by set. With all Accessory.
 
13 5/8''x10000 psi Single RAM BOP, Top& bottom Flanged 10000psi, ring grove lined with nick basedalloy. With two side outlet  ,,4 1/16''x1000psi flanged,
 
13 5/8''x10000psi Mud Cross, Top& bottom Flanged built as per API 1 6-A H2S service, DD material class. Ring grove lined with nick based alloy, With two outlet 4 1/16''x10000 psi flanged, ring grove lined with nick based alloy
4 1/16'' x10000 psi flanged kill& choke valves manual operated, built as per API 6-A, H2S service, DD material class. With handle. All valve type (FLS).
 
4 1/16'' x10000 psi,flanged  kill & choke valves  remote  hydraulic operated complete  with  handle  for  manual  override,  built  as  per  API  6-A H2S service, DD material class.
All valve type (FLS).
4 1/16'' x10 000psi, Check valve (NRV)  ,built  as  per  API  6-A H2S service, DD material class.
13 5/8'''' x10000psi , (900 mm) Spool flange riser ,built  as  per  API 1 6-A H2S service, DD material class., ring grove lined with nick based alloy
 
13 5/8'''' x10000psi , (600 mm) Spool flange riser ,,built  as  per  API 1 6-A H2S service, DD material class., ring grove lined with nick based alloy
 
Flange double studded adapter, ring grove lined with nick basedalloy, built as per API 1 6-A H2S service, DD material class., ring grove lined with nick based alloy.
 
13 5/8''x10000psi X13 5/8''x5000psi
13 5/8''x10000psi X11''x5000psi
13 5/8''x10000psi X7 1/16''''x5000psi
13 5/8''x10000psi X7 1/16''''x10000psi
13 5/8''x10000psi X11''x10000psi
4 1/16''  x10000psi blind flange ,,ring grove lined with nick based alloy
 
 
Studs and Rings
 
STUD with two nut ,1 7/8''x17 1/4''
STUD with two nut ,1''x6 3/4''
Ring Gasket BX-159
Ring Gasket BX-155
Ring Gasket BX-158
Ring Gasket BX-156
Ring Gasket RX-46
 
 
 
 
RAM for BOP (13 5/8 * 10K)
 
9 5/8''casing ram,
7'' casing ram
5 1/2 casing ram
2 7/8''-5''varible ram
31/2 pipe ram
41/2''-7'' variable ram
2 7/8'' pipe ram
5''drill pipe ram
Shear blind ram
 
 
 
31/2 pipe ram
41/2''-7'' variable ram
2 7/8'' pipe ram
5''drill pipe ram
Shear blind ram
 
 
 
CHOKE MANIFOLD 4 1/16''x 10k ( As clarified in attached (top & side view)
  Mounted on heavy oil field skid,   Built as API STD 16C , have the minimum inside diameter of ( 4) in , consist of ; 
Two (2 ) adjustable manual choke valves .                    
One (1) hydraulic adjustable choke valve.                      (18) gate valves  4 1/16" * 10K  .   (Valves #;
1,2,3,4,5,6,7,8,9,10,11,12,13,14,16,17,23 &24)             (5) Five gate valve 4 1/16" * 5K  .(Valves #; 15, 18,
20, 21&22 ).                                                                   
(01)one Gate valve 2 1/16" * 10 K  ( Valve # 25).          
(01)one Gate valve 2 1/16" * 5 K  ( Valve # 19). All valve type (FLS).
 
POWER CHOKE CONTROL PANEL
the power choke control panel shall meet API std 16C requirements and shall have minimum  following instruments:
 
One stand pipe pressure indicator rated 0-10000psi  WP; accuracy 0.5% of full scale.
One  annulus  pressure  Indicator  rated  0-10000  psi RWP;  accuracy  0.5%  of full scale.
Three mud pump stroke counter indicators 0-200 SPM range
One rig air pressure indicator.
One hydraulic actuator pressure indicator.
One choke speed adjustable valve
One choke opening indicator
One mud gas separator pressure indicator.  
One manual emergency backup pump.  
 
 
 
 
KILL MANIFOLD 10000 psi working pressure( as shown in the lay out " attachment")
Here is specified preferred KILL MANIFOLD configuration
mounted on heavy oil field skid 
 
One four ways Studded Cross API 6A with :- two Inlets complete with isolation valves 2.1/16-in x10000 psi W.P,-API 6-A; One inlet shall be connected with the kill line coming from rig floor manifold; the other inlet shall have a companion flange with a 2-in hammer union where can be connected the cementing unit discharge line.  two Outlets complete with isolation valves 4.1/16-in* 10000 PSI W.P,-API 6-A; One outlet shall be
connected with the upper kill line running to the MUD CROSS; the other outlet shall shall be connected with the lower kill line running to the BOP 
 
 
 
Flexible KILL& CHOKE LINES
 
 
Kill Lines connecting the BOP outlet valves with the kill manifold and rig  floor  manifold
 
The kill lines shall; have minimum 3.in inside
diameter, have 4.1/16'' flanged both end connections 
10000psi w.p ,H2S service ,,length 30FT
 
The choke lines shall; have minimum 3-in inside diameter.have 4 1/16''in flanged both end
connections  10000psi w.p ,H2S servic ,,length 40
FT
 
The   choke  and  kill  line are  flexible  type  they  shall  be  built according to API std. 16-C with  flanged end connections. ,steel shielded, fire  resistant
 
B.O.P TESTING UNIT (Unit & Pump)
A portable power operated testing unit minimum 15,000 w.p, complete with chart recorder having the capability  to pumpfluid at high floe and low rates
 
 
 
 
 
 
 
 
 
 
 B.O.P Control system ( as describe below))
 
 
 
 
 
One ( 1 ) Air And Electric Motor Driven
Automatic Pump And Accumulator Unit To
Include The Following Major Components
Unitized And Mounted On An Oilfield Skid Of  Heavy Duty Welded Steel Construction :
 One ( 1 ) ( 280 gallon ) fluid reservoir complete  with filler neck , drain plug , splash proof air vent .
Twenty Four ( 24 ) ( 11 Gallon ) Gross Capacity (
3000 Psi ) WPHydro – Pneumatic Accumulators ,  Nitrogen Charged Bladder Type .
One ( 1 ) Electric Motor Driven Triplex Pump
Assembly Complete With Automatic Pressure
Switch And High Pressure Safety Relief Valve ,
Pump Provides Up To ( 11.0 GPM ) At Bar  ( 3000
PSI ) Output Pressure , Explosion Proof Motor 30  hp , 3ph ,
 460 V/80 Hz
Three ( 3 ) Air Motor Driven 40.1 Ratio Plunger
Pumps With Self – Adjusting Packing, Operating
Double Acting Pumps, All Pumps Together Deliver
Approximately 11.0 GPM, 3000 PSI Maximum  Output Pressure With A 75 PSI Air Supply .
Two ( 2 ) Pressure Relief Valves Set AT 3,300 PSI ,
The Pressure Relief Valves Prevent Over
Pressurization Of The Accumulators And Pump  System And Are Self-Resetting .
One ( 1 ) Air Supply Manifold To Include Air
Regulator , Lubricator , Filter / Separator , Shutoff
Valve , Bypass Valve And Full Flow Automatic
Pressure Switch Assemblies Which Allows Full
Flow To The Air Pump Up To Desired Shutoff  Pressure .
One ( 1 ) Control Manifold Consisting Of The  Following Major Components :
1– One ( 1 ) heavy – duty structural steel mounting  frame mounted on top of fluid reservoir .
2– Six ( 6 ) 1”WP 3000 PSI  3- Position / 4- Way
Manual / Remote Operated Control Valve For  Operation Of :
 Annular preventer                  ( open / close )
 Upper pipe ram preventer     ( open / close )
 Middle pipe ram preventer    ( open / close )
 Lower pipe ram preventer    (open / close )
 

up:D10 Coupling MTC
Next:Hydraulic set Packer:
copyright @Rich oiltools all rights reserved Wendy Whatsapp/Tel: +86 18091823489 E-mail: wendy@richoiltools.com Home  | About us   | Products   | News   | Contact