Home About us Products News Contact
 PRODUCT CENTER
 whatsapp:
 
 
 Mud pump
At present you in : Home > Products > Mud pump parts
Mud pump: Model API Spac 7K
Available in variety of size and all the easy-comsumed parts is changeable.
1.The power end: The frame is welded steel-plate construction. Its stress-relieved after welding. The drive gears are involute type gears which means it can operate smoothly, effectively and longer life. The power end is by two way:  splash  and pressure lubricated.
2.The fluid end: The suction and discharge flanges conform to ANSI and API specifications.
3.The piston rod includes an inter-mediate rod, which is quick assembly&disassembly.
4.The valve seat bores have a bottom shoulders. The pistons and liners are spray lubricated and cooled, which can prolong pump service life.
 

Bimetal Liner
Bimetal Liner Of Mud Pump
Application
Bimetal liner is used as a kind of mud pump fluid end accessories in the oil drilling industry.
Features
Our bimetal liner, API complaint, provides wear-resistant outer sleeve and high chrome corrosion-resistant inner sleeve. The high chrome liner has high rigidity of HRC≥61-64 after heat treatment.
Advantages
The bimetal liner offers long service life of about 800 hours, which is 2 to 3 times the lifetime of common ones in severe 
Ceramic Liner
Ceramic Liner Of Mud Pump
Applications
The ceramic liner is used as a kind of mud pump fluid end parts in the oil drilling industry.
Features
Compared with the metal liner, the ceramic liner is wear and corrosion resistant and has extended working life. The ceramic liner helps reduce drilling cost and labor intensity. Made of internationally advanced, new material toughened zirconium oxide, the liner provides fracture toughness of K10-15Mpa (10 times that of the traditional one), and bending strength of σ600-800Mpa. The ceramic liner has excellent wear and corrosion resisting properties, with the Weber number being m18 and the elastic modulus of E200Gpa.
Advantages
The ceramic liner is the best choice for high pressure mud pumps. It is manufactured strictly in accordance with specific technical standards by use of advanced processing techniques. The ceramic liner comes in various specifications, which come in Φ150~180×310~440mm.
Valve Assembly
Valve Assembly Of Mud Pump
Application
Valve assembly is used as a kind of mud pump fluid end parts in the oil drilling industry.
Materials
Valve assembly is mainly made of high-quality alloy steel such as 20CrMnTi, 20CrNiMo, etc., which drastically exceeds the SY standards.
Advantages
The valve rubber of the valve assembly is made of new type high polymer materials to ensure superior performance, strong impact resistance under high temperature and high pressure.
Piston Assembly
Piston Assembly Of Mud Pump
Application
Piston assembly is used as a type of mud pump fluid end accessories in the oil drilling industry.
Materials
The main body of the piston assembly is made of forged steel 45# or 40Cr, and the piston cup and rubber are of high polymer materials.
Advantages
In order to accommodate every drilling need in various oil fields, we at KINGWELL have developed superior piston assembly for customers. Our piston assembly offers the advantages of reliable performance, strong wear and hydrolysis resistance under high temperature and high pressure.
Piston Rod
Piston Rod Of Mud Pump
Applications
Piston rod, as a kind of mud pump parts, is used as a fluid end accessory in the oil drilling industry.
Features
The piston rod is made of structural alloy steel, which goes through tempering heat treatment to achieve superior mechanical performance. The surface of the piston rod can be treated through phosphatization or galvanization.
Safety Valve
Safety Valve Of Mud Pump
Application
Safety valve is used as a mud pump fluid end accessory in the oil drilling industry.
Function
The safety valve serves to guarantee smooth operation of a mud pump within rated working pressure range.
Features
The safety valve offers easy reset, flexible operation, small bearing area, and high universality.
Valve Module
Valve Module Of Mud Pump
Application
Valve module is used as a kind of mud pump fluid end parts in the oil industry.
Advantages
The valve module is made by forging superior structural alloy steel, with no cracks or other flaws. It is fully compliant with API standards
Pulsation Dampeners
The pulsation dampeners shall be installed properly to reduce the pressure fluctuation and smooth the liquid flow. In order to extend the lifespan of the air bag, it is highly recommended to maintain the suggested proportion of the pump pressure to the pre-charge pressure of the air bag for the pulsation dampeners. Generally, the pump pressure shall be 2/3 that of the discharge pressure and no more than 4.5MPa.
Warning
1. Compressed nitrogen or compressed air shall be used for air charging. It is prohibited to utilize flammable and combustible gas such as compressed oxygen or hydrogen.
2. During maintenance, the pump pressure and the pressure inside the pulsation dampeners shall be zero. Since the residual pressure is generally small and can not be indicated on the pressure gauge, user shall confirm the pressure carefully to avoid accident caused by low pressure.
Extension Rod
The extension rod is an important part for the power end of mud pump in oil drilling. Produced by KINGWELL Company, it is forged from high quality alloy steel. High mechanical performance of the mud pump parts can be achieved through heat treatment. After being processed by CNC machine, this pump rod is ensured with precise geometric size. It is chrome plated with one-sided chrome thickness of over 0.1mm for increased abrasion resistance and extended service life of the alloy steel rod.
Crosshead
The crosshead is a vital part for the power end of mud pump in petroleum drilling. It acts as a pump component for connecting a piston with the extension rod. This mud pump part plays a guiding role. Its size precision decides the stability of operation of the whole mud pump. The crosshead assembly produced by KINGWELL Company is precisely forged from ductile cast iron beyond the industrial standard, which provides improved mechanical properties and elongation. Through heat treatment and parkerizing process, it eliminates the internal stress generated from the casting process and also increases its corrosion resistance. The crosshead centerline is determined prior to CNC machine processing. The error of all finishing size from the centerline has to meet the requirement of the drawing. In this way, the coaxially of the crosshead and the stability of both geometric size and power supply can be strictly guaranteed. The crosshead assembly covers a full range of BAOSHI, QINGSHI and LANSHI brand pumps. Both metric and imperial accessory products can be provided to meet the requirement of customers.
Upper and Lower Valve Guide
Upper and lower valve guides are important parts for the fluid end of mud pump in oil drilling. The upper type acts as a connector of valve spring and valve cover inside the hydraulic cylinder. It plays a guiding role in valve operation. The lower one is a connector of valve spring and hydraulic cylinder inside the cylinder. It has the function of fixing and guiding the valve operation.
Cylinder Head
Manufactured from domestically famous medium carbon alloy steel, the cylinder head has outstanding mechanical performance and wear-resistant property. The hammer forging, as well as the ultrasonic flaw detection technology, effectively eliminates the crack caused by porosity of metal structure. Our alloy steel cylinder head is machined with advanced CNC machine tool to ensure the small tolerance and good stability for installation. Apart from that, the precisely controlled heat treatment helps us achieve mechanical strength and hardness conforming to the requirement for mud pump.
Working Principle
The cylinder head is an important part for the inlet and outlet of fluid end valve housing. It is generally assembled to the flange of the valve housing. The bottom of the cylinder lid is installed against the positioning plate and the plug, playing the function of fixing.
Installation
User shall place the positioning plate into the hole at the pump head in case the installation of valve body assembly of the inlet and the guide apparatus is completed. In the meantime, the sealing ring of the cylinder head shall be put on the plug of the product. The outside of the sealing ring and the plug of the cylinder cover shall be smeared with light oil. Afterwards, push the plug into the opening of the fluid end and smear the thread of the product with lubricating grease. Finally, user shall screw in the thread into the cylinder head and fasten it with the fastening tool and hammer.
Flashboard Assembly
The flashboard assembly, also called positioning plate assembly, is an important component for the fluid end of mud pump in petroleum drilling. It has the function of longitudinally fixing the guide and horizontally fixing the cylinder head assembly for a hydraulic cylinder. Flashboards made by KINGWELL Company cover a full range of BAOSHI, LANSHI and QINGSHI brand pumps. All of them adopt high grade alloy carbon steel made by domestic steel plants. They have experienced the CNC cutting, blanking, heat treatment and CNC machining process, which ensures the geometric size. Some models of the product are added with copper blocks in order to increase the abrasion resistance of both flashboard and hydraulic cylinder end face. As mud pump accessories, they are well received by clients from numerous markets.
Valve Cover
Scientifically designed, the valve cover is made of first class medium carbon alloy steel from domestically famous brand, for excellent mechanical property and good resistance to abrasion. To avoid the defection such as crack caused by porosity of metal structure, we particularly manufacture the mud pump part with free forging and ultrasonic flaw detection technology. The advanced CNC machine tool enables accurate dimension of the valve cover. By virtue of the precise control on heat treatment, the mechanical strength and the hardness of the valve cover are in compliance with the requirement for mud pump working environment.
Working Principle
The valve cover is an important part for the inlet and outlet of valve housing for fluid end. The bottom of the mud pump valve cover is connected to the valve body guider, to ensure the airtightness and the stability of the water outlet.
Installation
Firstly, put the seal ring of the product in the hole of the valve housing. Secondly, user shall smear sealing element and the thread with lubricating grease. Finally, the valve cover shall be fastened with the fastening tool and the hammer.
Wear Plate
The wear plate is a kind of pump accessory for the fluid end of mud pump in oil drilling. It has the function of sealing and pressure maintaining for a hydraulic cylinder. All wear parts made by KINGWELL Company adopt high end alloy carbon steel made by domestic steel plants. These wear resistant steel plates have experienced the high temperature forging, heat treatment and CNC machining process, which guarantees geometric size, sealing performance, increased abrasion resistance and durability. Different models and types of wear plate (liner) products and related jackscrews can be offered upon request.
Cylinder Flange
The cylinder flange is a vital part for the fluid end of mud pump in petroleum drilling. As a mud pump element, it plays a role in fixing and sealing the hydraulic cylinder head plug and cover. A high-grade proper flange is adopted for improved cylinder head plug loading condition, increased bearing capacity and extended lifespan. The product made by KINGWELL Company covers a full line of BAOSHI, LANSHI and QINGSHI pumps. It is manufactured from high quality alloy carbon steel by domestic steel plants. This carbon steel flange withstands the high temperature forging, heat treatment and CNC machining process for guaranteed geometric size as well as increased wear resistance and durability.
Valve Cover Flange
The valve cover flange is important to the fluid end of mud pump during the oil drilling process. It is an oil drilling tool that has the function of fixing and sealing the hydraulic cylinder head plug and cover. A superior quality proper flange is utilized for improved cylinder head plug loading condition, increased bearing capacity and extended service life. The mud pump part made by KINGWELL Company covers all kinds of BAOSHI, LANSHI and QINGSHI brand pumps. It adopts top grade alloy carbon steel manufactured by Chinese steel plants. As a fluid end part, this product is completed through high temperature forging, thermal treatment and CNC machining in order to guarantee geometric size and also improve durability and wear resistance.
Pressure Gauge
The Yt-100 pressure gauge is made of stainless steel. This pressure measuring device can be installed at axial direction or radial direction. The screw thread of the pressure meter makes the installation of the product easier. Our stainless steel pressure gauge is strictly manufactured according to IP 65 protection level. The measuring accuracy of the pressure gauge is up to 1.5%.
New Type Core Box
Brief Introduction 
The core box is a container used to store cores which are pulled out by a drill. Rock cores obtained from a drill hole are put into a core tray sequentially and cataloged timely by geologist. The product would be numbered and stored in a core library.
Features of New Type Core Box
The new type core box is made from new synthesized materials by high pressure injection molding. It is obviously superior to ordinary plastic core tray regarding the resistance to shock, aging, high temperature, extremely cold climate and other aspects. This product is categorized into 2 series and 8 sizes. It is equipped with box cover, flash-board, chains and other accessories. Our drill core box is reliable equipment of long-term storage and convenient transportation for geological exploration and oil exploration.
2S Gear Oil Pump
2S Gear Oil Pump
The 2S gear oil pump is the main element for the lubricating system of the power end for mud pump. This lubricating oil pump is usually installed on the pressure lubrication system, offering lubricating oil for crosshead, crosshead bearing, extension rod, etc.
Corrugated Bellows
Corrugated Bellows
The corrugated bellow is a kind of tubular elastic rubber product which is connected using a corrugated piece for the mud pump from LANSHI and QINGSHI factories. It plays a role in separating and sealing between the fluid end and the power end of a mud pump. Dezhou KINGWELL Petroleum Machinery Co., Ltd. is capable of producing different models of corrugated pipes. Our company holds an independent rubber accessory factory and the first self-invented rubber injection machine in China. After injection, the raw material can be vulcanized and completed in an integrated mould for only once, which ensures both performance and lifespan of the corrugated bellow.
Plug, Cylinder Head Sealing Plug
Plug
  
The plug is an important part for the fluid end of mud pump in oil drilling. Its front part is equipped with cylinder head (valve cover) sealing ring for the sealing and pressure maintaining of a hydraulic cylinder. A top-grade suitable plug is adopted to improve the cylinder head plug loading condition and also increase the bearing capacity and service life. Plugs made by KINGWELL Company cover a full range of pumps from BAOSHI, LANSHI and QINGSHI factories. All of them adopt high quality alloy carbon steel made by domestic steel plants. They are finished by means of high temperature forging, heat treatment and CNC machining so as to achieve guaranteed geometric size, sealing performance, increased durability and wear resistance.
Locking Clip
Locking Clip
The locking clip is a part of the fluid end of F series mud pump from BAOSHI factory. It has the function of fixing and supporting the guide inside a hydraulic cylinder. The product produced by KINGWELL Company is made from superior quality brass. After being heated, it is bended and completed with specialized equipment for increased wear resistance and extended service life.
Stuffing Box, Diaphragm Stuffing Box
Stuffing Box
The stuffing box is an important component for the power end of mud pump in oil drilling. It plays a crucial part in sealing the lubricating system and the operation inside power end. Its housing produced by KINGWELL Company is precisely cast from ductile cast iron beyond industrial standard for improved mechanical properties and elongation. The adoption of heat treatment and phosphating technology helps eliminate the internal stress generated from the casting process and also improves corrosion resistance. After CNC finish machining, it is tightly assembled with wear-resistant rubber, vulcanized oil seal and sealing ring, as well as the nylon oil seal ring made by the machining center. In this way, the service life of sealing elements inside the stuffing box assembly could be greatly extended. This product is well received by clients.
Cylinder Retaining Ring, Liner Locking Ring
Cylinder Retaining Ring
As its name implies, the cylinder retaining ring is a part of fluid end for fixing the cylinder sleeve.
Cylinder Head Plug
Cylinder Head Plug
The cylinder head plug is a vital part for the fluid end of mud pump in petroleum drilling. A high quality suitable plug is adopted for improved loading condition as well as increased bearing capacity and lifespan. The product made by KINGWELL Company covers a full range of BAOSHI, LIANSHI and QINGSHI brand pumps. It is derived from top grade alloy carbon steel made by domestic steel plants. Besides, this product is completed with high temperature forging, heat treatment and CNC machining technology so as to guarantee the geometric size, sealing performance as well as increased durability and abrasion resistance.
Piston Rod Nut
Piston Rod Nut
The piston rod nut is a kind of anti-loosening nut for the end of piston rod. In common with the material of piston rod, it is made from superior quality alloy steel. The head of the product manufactured by KINGWELL Company is filled with a wear-resistant high strength nylon gasket so as to prevent rod thread from abrasion or being impacted by mud when in use of a piston rod. After heat treatment, this product offers better mechanical property. All models of piston rod nuts in metric and imperial units from BAOSHI, LANSHI, QINGSHI and other factories can be produced to meet the needs of customers.
Discharge Filter Screen Assembly
Discharge Filter Screen Assembly
The discharge filter screen assembly is a main component of the outlet for the fluid end of mud pump in petroleum drilling. It is composed of filter screen assembly, housing assembling as well as sealing ring, end cover and other accessories. The integrated formed filter screen housing made by our company adopts casting technique. The filter screen assembly is manufactured from superior quality alloy steel and assembled after CNC machining. This not only provides excellent corrosion resistance and pressure resistance, but also helps customers increase production efficienc

copyright @Rich oiltools all rights reserved Wendy Whatsapp/Tel: +86 18091823489 E-mail: wendy@richoiltools.com Home  | About us   | Products   | News   | Contact